[Tutorial] Clean install NITDroid on Nokia N9/50

[coderus]

accli -I =

Current mode: open

so? can you READ?

• A. You have vanilla device with original firmware
  
  • Preventing display Scary Warranty Void message

• C. You using openmode kernel and having Scary Warranty Void message and want to disable it
  • You should do FULL REFLASH to original firmware, and do all.

see??

[isaquese]

Booting harmattan takes alot of battery. Try fully charged and boot harmattan a few times you will notice how much battery it drains.

I've never noticed that. Thank you =D

[cylent]

accli -I =

Current mode: open

so? can you READ?

• A. You have vanilla device with original firmware
  
  • Preventing display Scary Warranty Void message

• C. You using openmode kernel and having Scary Warranty Void message and want to disable it
  • You should do FULL REFLASH to original firmware, and do all.

see??

i am sorry but you're trippin'.
i've done all that. i've reflashed the DFL61_HARMATTAN_30.2012.07-1_PR_LEGACY_005-OEM1-958_ARM with the zimage kernel...

i am however suspecting that --flash-only-kernel maybe the problem?

i will try again.

[kimmoli]

Once put your device in openmode with zImage kernel, you cant remove warning message.
You have to reflash completely without zImage kernel, then remove the warning message, then flash zImage.

[coderus]

ohhhh, okaaaay, i should add for dummies.
FULL REFLASH to original firmware without any aditional kernels, just one ape image file.

[kaswinikumar]

@e-yes, thank you, extracting the img.bin helped.

[ThraxZzz]

Booting harmattan takes alot of battery. Try fully charged and boot harmattan a few times you will notice how much battery it drains.

Mine drained from 80 to 76,man,just to boot harmattan,lol

[lstrike]

ohhhh, okaaaay, i should add for dummies.
FULL REFLASH to original firmware without any aditional kernels, just one ape image file.

Hi, I have been going crazy trying to get this stuff setup.  I can't seem to flash to bone stock keep getting a Downgrade disallowed message...HEEEELLLPPP!!! Tried with openmode on and off...(not that it should matter) Please?

Edit:  Think I figured it out...read though the installation script and noticed PR_005 as opposed to PR_001.  Apparently for my device there are two variants.  In Navifirm I found the 005.  I am downloading now and I am going to give it a whirl see what happens.

**Edit...sighhhh download keeps on hanging at 19%.  Tried two versions of Navifirm 1.5+ and 1.7+.  Rebooted the machine.  Cleared the cache from the navifirm directory...this just isn't my day.

059J245 variant PR_005 just wont download past 19%.  Tried the SEAP file and no problem.  I also tried a different product code with the same PR_005 and they also die and 19%....aghhhhh

[coderus]

try on another machine.
and copy here flasher log.

[tanwg]

I decided to try Nitdroid on my N9 yesterday and did it successfully once without any problems. I did it with PR_005 instead of PR_001 since my device is on PR_005.

Thanks Coderus for the great guide!

[tag12895]

- run following command in shell (as user):
disclaimer-cal remove View-openmode

I get this when I type command

[kimmoli]

You have already flashed zImage (open mode kernel) ? (you got warning when you last time rebooted your phone?)

Follow instructions, you have to do this "disclaimer-cal remove View-openmode" before that.

[tag12895]

Ok
will reflash and try again

Thanks
tag12895

[kimmoli]

ohhhh, okaaaay

Once more Coderus... Can you add to the very top of your tutorial that READ THE GUIDE TWICE THROUGH BEFORE DOING ANYTHING.
Then decide which to choose A, B or C ... ??

[coderus]

hmm, not so bad idea...