N9 Kernel for Dual-Boot

[Dousan]

Try to flash stock kernel only:

flasher -F <firmware-image> --flash-only=kernel -f -R

Regards Dousan...

[bounty]

@bounty : where did you get PRx.x file ?

Hm, let's say it is there

[kimmoli]

hint can be found here http://theunlockr.com/2012/03/23/how-to-run-android-ice-cream-sandwich-on-the-nokia-n9/

[uli_china]

If I run (Version 059J250)
flasher -a DFL61_HARMATTAN_30.2012.07-1_PR_LEGACY_003-OEM1-958_ARM.bin -k zImage –flash-only=kernel -f -R
I get the following response:
ERROR: ReadFile(65540) GetOverlappedResult() error 1167 timeout 4975 ms

What I’m doing wrong? :-(

[coderus]

re-download flasher again. if not happen bug in your windows.

[uli_china]

Coderus, thanks for reply. Re-Installed, same problem. Will check another PC tomorrow. Get the same error if I just run "flasher -F firmware.bin -f -R". Posted now on maemo.org
because problem seems not related to zImage. 

[coderus]

i don't know where "same" posted
try on other pc.

[chetiserve]

Hi, I'm new
Can I use this firm: DFL61_HARMATTAN_30.2012.07-1.339.03.1_PR_LEGACY_339_ARM_RM-696_PRD_signed.bin? Or I must use DFL61_HARMATTAN_30.2012.07-1_PR_LEGACY_001-OEM1-958_ARM.bin? Why I've the error Bad ape-algo format in DFL61_HARMATTAN_30.2012.07-1.339.03.1_PR_LEGACY_339_ARM_RM-696_PRD_signed.bin?

Thanks
chetiserve

[coderus]

you can use any flashable image you want

[chetiserve]

Thanks. Now the error is: Devicelock ON but I've take the option on OFF. If I go to change the protect code it send me an error but I don't set the protect code.

[lstrike]

Have the Devicelock ON: cannot flash unsigned image 

I definitely have Devicelock OFF.  Tried to turn it on (to try the on and off trick) but it won't allow me to (asks to set a password then tell me wrong password even though I never had on).

After reading all 14 pages I also tried a straight flash like this:

C:\Program Files\Nokia\Flasher>flasher -F DFL61_HARMATTAN_30.2012.07-1_PR_LEGACY
_001-OEM1-958_ARM.bin -f -R

But that give me an error about not being able to downgrade:

C:\Program Files\Nokia\Flasher>flasher -F DFL61_HARMATTAN_30.2012.07-1_PR_LEGACY
_001-OEM1-958_ARM.bin -f -R
flasher 3.12.1 (Oct  6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Suitable USB interface (bootloader/phonet) not found, waiting...
Found device RM-696, hardware revision 1603
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_30.2012.07-1_PR_005
Sending ape-algo image (7096 kB)...
100% (7096 of 7096 kB, avg. 15734 kB/s)
Suitable USB interface (phonet) not found, waiting...
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1603
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_30.2012.07-1_PR_001
Image moslo not present
Image mmc not present
Image tar skipped
Image config skipped

Battery level 91 %, continuing.

    image        [state    progress         transfer     flash speed]
---------------------------------------------------------------------
[_] cert-sw      [init         0 %       0 /       0 kB      NA     ]
[ ] cmt-2nd      [pending      0 %       0 /       0 kB      NA     ]
[ ] cmt-algo     [pending      0 %       0 /       0 kB      NA     ]
[ ] cmt-mcusw    [pending      0 %       0 /       0 kB      NA     ]
[ ] xloader      [pending      0 %       0 /       0 kB      NA     ]
[ ] secondary    [pending      0 %       0 /       0 kB      NA     ]
[ ] kernel       [pending      0 %       0 /       0 kB      NA     ]
[ ] rootfs       [pending      0 %       0 /       0 kB      NA     ]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 10: Security failure

    image        [state    progress         transfer     flash speed]
---------------------------------------------------------------------
[f] cert-sw      [init         0 %       1 /       1 kB      NA     ]
[ ] cmt-2nd      [pending      0 %       0 /       0 kB      NA     ]
[ ] cmt-algo     [pending      0 %       0 /       0 kB      NA     ]
[ ] cmt-mcusw    [pending      0 %       0 /       0 kB      NA     ]
[ ] xloader      [pending      0 %       0 /       0 kB      NA     ]
[ ] secondary    [pending      0 %       0 /       0 kB      NA     ]
[ ] kernel       [pending      0 %       0 /       0 kB      NA     ]
[ ] rootfs       [pending      0 %       0 /       0 kB      NA     ]
Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
Downgrade disallowed (1329850778)
[Pipe   0] Finishing in error state with status 10
========================================

ERROR: Failed to flash images

Any help would be greatly appreciated as I can't even flash to stock at this point if I needed to in the future.

[Sniper_swe]

I got downgrade dissallowed. Redownloaded the same image and it worked fine. Try changing pc to if that not wont work.

[lstrike]

Hi thanks for the response.  I have actually tried it on two different machines with two different files...this is pretty frustrating.  Don't usually have problem flashing anything.

[lstrike]

One question maybe the problem...on the code I posted the lines that read:

Suitable USB interface (bootloader/phonet) not found, waiting...
Found device RM-696, hardware revision 1603
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_30.2012.07-1_PR_005


Is that my current version?  If so is what I am trying to flash different and causing the error maybe?
DFL61_HARMATTAN_30.2012.07-1_PR_LEGACY_001-OEM1-958_ARM.bin

I downloaded the version from Navifirm that corresponded to the number on my sim.  What is PR_005?

Edit - after a quick visit to Navifirm noticed there are two different entries for my device.  I am now downloading the second variant that is PR_005. Gonna install and see what happens.

[Sniper_swe]

in flasher type flasher -i that will tell you what version you have installed.