Author Topic: N9 Kernel for Dual-Boot  (Read 245553 times)

Offline PuCiNhOOO

  • NITDroid pro
  • ***
  • Posts: 185
Re: N9 Kernel for Dual-Boot
« Reply #300 on: September 27, 2012, 01:50:54 pm »
help me. i can't copy kernel files in my N9 whith comm... please help me

You cant what?

Offline gharam

  • NITDroid novice
  • *
  • Posts: 1
Re: N9 Kernel for Dual-Boot
« Reply #301 on: October 01, 2012, 03:45:35 pm »
after i install and do all thing the android its work on my Nokia N9
and everything good
but when i make a call or receive a call i cant open line and i dont hear the ring for calling
so what i can do for that

Offline PuCiNhOOO

  • NITDroid pro
  • ***
  • Posts: 185
Re: N9 Kernel for Dual-Boot
« Reply #302 on: October 01, 2012, 06:45:32 pm »
after i install and do all thing the android its work on my Nokia N9
and everything good
but when i make a call or receive a call i cant open line and i dont hear the ring for calling
so what i can do for that

excuse me, but what the hell are you questioning?
god damn... NITDroid dont have the voice calls yet working...

Offline SloLegend

  • NITDroid novice
  • *
  • Posts: 5
Re: N9 Kernel for Dual-Boot
« Reply #303 on: October 04, 2012, 02:47:08 pm »

I get this error when i try to flash. :S
The device lock is OFF on the N9, the SIM password is also OFF.
Help? :(

Offline PuCiNhOOO

  • NITDroid pro
  • ***
  • Posts: 185
Re: N9 Kernel for Dual-Boot
« Reply #304 on: October 04, 2012, 02:51:08 pm »

I get this error when i try to flash. :S
The device lock is OFF on the N9, the SIM password is also OFF.
Help? :(

is your device operator free?

Offline SloLegend

  • NITDroid novice
  • *
  • Posts: 5
Re: N9 Kernel for Dual-Boot
« Reply #305 on: October 05, 2012, 02:23:22 pm »

I get this error when i try to flash. :S
The device lock is OFF on the N9, the SIM password is also OFF.
Help? :(

is your device operator free?

Yes, the operator said it is.

Offline Smoozle

  • NITDroid novice
  • *
  • Posts: 1
Re: N9 Kernel for Dual-Boot
« Reply #306 on: October 07, 2012, 08:48:20 am »
Hi there, new to this forum and NitDroid.

Have just recently successfully (?) run through the instillation steps on my N9, however, when I press the up volume at the dual boot, I get what looks like three @ symbols. My phone freezes for a moment, then turns off.

Do you have any idea what could be wrong, or what I could do to fix this?

Update 1: I'm an idiot, I was trying to install Alpha 4 on PR 1.3. I've now removed nitdroid and am installing Alpha 5 instead. Will update with success(?).

Update 2: Alpha 5 installed and Android is loading! WOOP!

You guys are fricken awesome. Thank you so much for all your hard work.
« Last Edit: October 07, 2012, 09:40:11 am by Smoozle »

Offline Jenu

  • NITDroid novice
  • *
  • Posts: 1
Re: N9 Kernel for Dual-Boot
« Reply #307 on: October 08, 2012, 10:29:03 am »
WE NEED TESTERS


http://downloads.nitdroid.com/e-yes/n9/zImage.pr13
md5: 3f354a2b48a0b571ca32d6082391108a

Please, try to use it in Harmattan, report any regressions/issues/etc. Success stories are welcomed as well.

Short HOWTO:


---
Before you proceed make sure that "Device lock" is not enabled in Harmattan (In Settings \ Security \ Device Lock \ Autolock: off). If you have an Mail-for-Exchange account configured, you may need to delete it before you can disable device lock.

If flasher bombs out with "Devicelock ON: cannot flash unsigned image", then you didn't, go back and disable it.
----
From http://wiki.meego.com/ARM/N950


1. Download flasher for Harmattan for your OS from here: http://tablets-dev.nokia.com/maemo-dev-env-downloads.php
(scroll down to "Maemo Flasher-3.12.1 Tool for Harmattan for your_favorite_OS"). Install/or/unpack it.

2. Switch off your device, unplug it from PC.

3. Download kernel, Harmattan FIASCO image (filename looks like DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_001-OEM1-958_ARM.bin) and place these files into flasher's directory.
(TIP: you can use NaviFirm to find and download image specific to your phone)

4. type in terminal (cmd.exe in Windows):
Code: [Select]
cd path_to_directory_which_contains_your_flasher
flasher -a DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_001-OEM1-958_ARM.bin -k zImage.pr13 --flash-only=kernel -f -R

5. Plug in device to PC. After few seconds flashing starts and 4-5 seconds later device will be rebooted and regular boot sequence start.

Known limitations:
1. OpenMode. Secure storage problems in Harmattan (can't save passwords for email client, Twitter, Facebook etc).
2. OpenMode. Device Lock Code wouldn't work.
3. SIMLOCK. Sorry, you are out of luck, seems to be your device is locked by operator (do you have any obligatory contract?). Please, contact Nokia or operator representatives/support for more information.

---

Old kernel, for Harmattan PR 1.2 and NITDroid alpha3 is still available here:

http://downloads.nitdroid.com/e-yes/n9/zImage.pr12
md5: 94d796f63b7c66ef796fce5209134e05

Offline Novice Zak

  • NITDroid novice
  • *
  • Posts: 10
Re: N9 Kernel for Dual-Boot
« Reply #308 on: October 10, 2012, 10:57:41 am »
Hi guys, I've just recently discovered this amazing possibility of running android ICS on my Nokia N9. I've downloaded all files and tried flashing on Win 7 64bit but then I keep getting this:

C:\Windows\system32>cd path_to_directory_which_contains_your_flasher
The system cannot find the path specified.

C:\Windows\system32>cd C:\Program Files\Nokia\Flasher

C:\Program Files\Nokia\Flasher>flasher -a DFL61_HARMATTAN_30.2012.07-1.331.1_PR_
LEGACY_331_ARM_RM-696_PRD.bin -k zImage.pr12  --flash-only=kernel -f -R
flasher 3.12.1 (Oct  6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

ERROR: Unknown arguments specified!
Usage: flasher [OPTIONS]
Options:
  -V, --version                   Print application version
      --quiet                     Quiet flashing, do not show progress table
  -F, --fiasco=ARG                Location of FIASCO image
  -a, --ape-algo=ARG              Location of APE algorithm image (FIASCO or pla
in)
  -k, --kernel=ARG                Location of kernel image
  -L, --moslo=ARG                 Location of moslo image
  -n, --initfs=ARG                Location of initfs image
  -r, --rootfs=ARG                Location of root filesystem image
      --cmt-2nd=ARG               Location of CMT FIASCO 2nd image
      --cmt-algo=ARG              Location of CMT FIASCO algorithm image
      --cmt-mcusw=ARG             Location of CMT FIASCO MCUSW image
  -i, --read-device-id            Print out the device type
  -f, --flash                     Load and flash all supplied images
  -l, --load                      Only load all supplied images
  -b, --boot[=ARG]                Boot the kernel with optional cmdline
  -R, --reboot                    Reboot the device (after flashing)
  -c, --cold-flash                "Cold flash" the device
      --enable-rd-mode            Enable R&D mode on the device
      --disable-rd-mode           Disable R&D mode on the device
      --set-rd-flags[=ARG]        Set R&D mode flags on the device
      --clear-rd-flags[=ARG]      Clear R&D mode flags on the device
      --query-rd-mode             Query the device R&D mode status and flags
      --flash-only=ARG            Flash only certain components
  -M, --flash-only-mmc            Shortcut for flash only MMC
  -U, --usb-device=ARG            Specify USB device to use, <bus>[:<device-addr
ess>]
                                  or s:<usb-serial-number> or S:<serial-number>
  -v, --trace-level[=ARG]         Set or increment trace level
      --erase-user-data[=ARG]     Erase user data, ARG is erase method (e.g. sec
ure)
                                  Erases eMMC and swap, resets device lock
      --erase-mmc[=ARG]           Erase eMMC, ARG is erase method (e.g. secure)
      --suppress-warranty-warning Suppress warranty warning


What am I doing wrong? Please help. Thanks in advance.

Offline mgrover

  • NITDroid user
  • **
  • Posts: 26
Re: N9 Kernel for Dual-Boot
« Reply #309 on: October 10, 2012, 12:57:05 pm »
your not adding any arguments to the flasher, what you need to put in is

flasher -a DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_001-OEM1-958_ARM.bin -k zImage.pr13 --flash-only=kernel -f -R

my days some people need to learn to read...

Offline Novice Zak

  • NITDroid novice
  • *
  • Posts: 10
Re: N9 Kernel for Dual-Boot
« Reply #310 on: October 10, 2012, 01:19:18 pm »
your not adding any arguments to the flasher, what you need to put in is

flasher -a DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_001-OEM1-958_ARM.bin -k zImage.pr13 --flash-only=kernel -f -R

my days some people need to learn to read...
Please understand the nature of my question. Also, my kernel file is different from yours as per region. Mine is DFL61_HARMATTAN_30.2012.07-1.331.1_PR_LEGACY_331_ARM_RM-696_PRD.bin so I wanna know if this does have any effect. I've typed everything in the cmd precisely as described. Or should I download the "DFL61 HARMATTAN 40.2012.21-3 PR LEGACY 001-OEM1-958 ARM.bin" file if that's the case?

Offline yeohsheng

  • NITDroid novice
  • *
  • Posts: 9
Re: N9 Kernel for Dual-Boot
« Reply #311 on: October 10, 2012, 02:16:15 pm »
could you please, take a pic of where you put all the file required?

Offline SloLegend

  • NITDroid novice
  • *
  • Posts: 5
Re: N9 Kernel for Dual-Boot
« Reply #312 on: October 11, 2012, 05:43:48 pm »

I get this error when i try to flash. :S
The device lock is OFF on the N9, the SIM password is also OFF.
Help? :(

I had the passcode ON earlier, that's why it didn't work.
I did this:
1-

flasher -F DFL61_HARMATTAN_30.2012.07-1_PR_LEGACY_001-OEM1-958_ARM.bin -f -R
2-

flasher -a DFL61_HARMATTAN_30.2012.07-1_PR_LEGACY_001-OEM1-958_ARM.bin -k zImage --flash-only=kernel -f -R

And now it works perfectly. :)

Offline girishpadia

  • NITDroid novice
  • *
  • Posts: 7
Re: N9 Kernel for Dual-Boot
« Reply #313 on: October 16, 2012, 04:08:46 am »
I tried to do in following manner but I am unsuccessful.

1) Switched off device. Disconnected it from PC
2) Open cmd.exe and went to flasher path.
3) I gave the flasher command with the parameters and options as mentioned above.
4) Now it shows me message as follow.

Picked ape-algo from a FIASCO file
Suitable USB interface (bootloader/phonet) not found, waiting...

Even though I connect device to my PC this message do not show me any activity. I tried again by switching ON the device but all attempt are unsuccessful. Can you please help

Offline mapl

  • NITDroid user
  • **
  • Posts: 48
Re: N9 Kernel for Dual-Boot
« Reply #314 on: October 16, 2012, 05:13:57 am »
@girishpadia

Check USB cables and drivers. (Try using different port)